开云游戏

Nano heat Insulation felt series:
Nano heat Insulation felt jsgw - 950
Nano heat Insulation felt jsgw - 1050
Nano heat Insulation felt jsgw - 1100
Product description
The nano heat insulation felt is formed by using light, inorganic nano SiO 2 and ceramic fiber with extremely low heat conductivity as raw materials and aluminum foil with high reflectivity as the bottom material, and adopting a single-layer composite structure to be continuously coated and matched with a pressing and baking process, and the heat conductivity of the nano heat   insulation felt is smaller than that of static air, and the heat   insulation performance of the nano heat   insulation felt is about 4 - 6 times better than that of the traditional heat   insulation material, so the nano heat insulation felt is the heat insulation material with the best performance so far.
The nano heat insulation felt has ultra-low heat   conductivity and can greatly save energy compared with the traditional heat insulation material, and the diameter of the nano heat   insulation felt is 150 mm.. Temperature of 600 degrees of pipeline, for example, in the use of thickness is only one third of the thickness of the traditional mineral wool, per meter of pipeline save 1400 degrees of electricity per year, the total length of 1000 meters of pipeline save energy about 1.4 million degrees of electricity per year.
Characteristics and functions
High temperature resistance - long-term use temperature of 400 ~ 1000 degrees
heat conductivity - 2 ~ 10 times lower than the conventional heat insulation material, only 0.052 w / m k at 800 degrees
Durability - can be used as insulation permanent layer, service life of more than 5 ~ 10 years
Safety and environmental protection - pure non-polar material combination, good heat stability, no release of any harmful substances
Economic analysis - the price is lower than 50 % of foreign similar products, 10 ~ 30 % energy saving than conventional materials
Cold and hot surface temperature self-examination table
Nano heat insulation felt has excellent heat insulation performance, due to its heat conductivity is very small, only 1 / 3 ~ 1 / 4 of the traditional heat insulation material, therefore, under the condition of guarantee the same cold surface temperature insulation thickness can be very thin, that is to say, under the condition of the insulation thickness can not be too thick, can the cold surface temperature as far as possible to the lowest, because the site heat conditions are complex and changeable, the heat insulation effect under the same conditions is not the same.
Application areas:
Metallurgy: ladle, ladle, tundish, converter, torpedo ladle
Machinery: industrial furnace, electric furnace, furnace door, furnace cover
Automobile: engine heat   shield, catalytic exhaust pipe
Petrochemical: cracking furnace, conversion furnace, heating furnace
Power: boilers, steam turbines, pipelines
Building materials: ceramic furnace, rotary furnace
Use effect:
Reduce that thickness of the heat insulation layer
Since that thickness of the Heatlay can be greatly reduced, the heat insulation device can be miniaturize and the volume of the device can be increased
Reduced heat storage
The heat storage of the heat insulation layer is reduced, and the heating time of the furnace is greatly shortened, so that not only energy is saved, but also the Tianjin special nano microporous heat insulation material can achieve the effects of improving productivity and being easy to perform temperature control.
Reduce heat dissipation
Because the heat insulation effect can be achieved by using a thinner nano microporous heat   insulation material, the heat   dissipation surface area can be reduced, and the heat loss can be greatly reduced. Therefore, the surface temperature of the furnace can be reduced and the working environment can be improved.
Temperature homogenization
The invention has the effect of reducing heat loss, can realize the homogenization of the temperature to the maximum extent, and can lead the metal solution, the glass solution and the heat treatment product of the kiln to be more uniform in temperature and improve the product quality as a result.